Converting from Incandescent Lights to LED Lighting on Your Trailer
Many people are replacing the incandescent lighting on their trailers with LED lighting these days. As the prices of LED lights come down, you are seeing them more and more. So why is everyone switching over to LED?
Advantages of LED Lighting
- Draw a fraction of the amperage that incandescent lights draw
- Operate at a cooler temperature
- Longer lasting
- More resistant to shock and vibration
- Typically brighter than incandescent lights
- Illuminate 2/10 of a second faster – which equates to 18′ when traveling at 65 mph
- Some LED’s are offered in voltage operating ranges – Manufacturers of these lights state that some lights operate from 9v – 32v or 10v – 30v, depending on the manufacturer (Ideal for people using 12v & 24v vehicles. In these cases the lights on the trailer will operate regardless of whether the vehicle is putting out 12v or 24v)
Replacing the Lights
Replacing the lights on your trailer with LED lights isn’t a difficult task. You can buy replacement LED lights in a kit or each light individually. To simplify the task, purchase LED lights with the same mounting style as your existing incandescent lights. You can also take this opportunity to change to different style lights. Just remember to adhere to DOT lighting requirements and keep in mind that different mounting styles may require some extra drilling, cutting, etc.
Some LED lights may be hard-wired, while others may require a pigtail plug that is typically different than ones used on incandescent lights. Hard-wired lights can be wired directly to the wiring on your trailer. If your trailer wiring harness directly accepts plug in light harnesses, there are LED adapter plugs to adapt from the LED plug on the back of the light to what your incandescent light plug harness. Check out those LED adapter plugs here!
Possible Issues When Converting to LED Lighting
The ideal scenario would be removing the incandescent lights, installing and wiring the replacement LED lights, connecting the trailer and having everything work perfectly, but sometimes that is not the case.
Some vehicles feature a lamp out sensor, which causes the turn signal to hyper flash on the trailer . The low draw of the LED lights tricks the vehicle into thinking that the lamp is not working. This can be fixed by using an LED lamp out bypass adapter. You can also install an LED bulb load resistor on the tow vehicle. One resistor is required for each LED turn signal. Also since the resistor is on the tow vehicle, if you use multiple vehicles to haul your trailer that could cause an issue.
If you are converting to LED lights it is also important to replace all of the lights on the trailer with LED’s. Since the incandescent lights have a higher draw, it is possible for the LED lights to burn out if they wired in line with incandescent lights.
Based in Centreville, Maryland, Centreville Trailer Parts LLC wants to be a leader for all things needed to keep trailers in good working order. We have parts for all kinds of trailers, such as boat trailers, car trailers, enclosed trailers, horse trailers and large tractor trailers. When a part is needed, but doesn’t exist, we will actually make those parts and offer them for sale. Centreville Trailer Parts LLC has local trailer parts stores serving customers in Maryland & Virginia and online trailer parts store serving customers worldwide.